•  I am using the IC200UEX636 with 4 analog  inputs and  2 analog outputs. For my application I need ONE more analog output.   Why do they not make a unit with even numbers such as 4 analog inputs AND 4 analog outputs ???   Wouldn't that make sense ??
    Wed May 04 15:05:37 GMT 2016 Answer Like 0 Follow 0
  • Cimplicity 8.2 SIM39
    Trying to debug a script in Program Editor using the Watch window.  Point values come up as hex numbers (e.g. &H01EE7D58).  How can I covert these values to make any sense out of them?  I tried converting using several online converters but none equal the value shown in the Point Control Panel.
    Axle
    Wed May 04 14:49:52 GMT 2016 Answer Like 0 Follow 0
  • WDean1460738982

    upgrade project

    posted in CIMPLICITY
    Can an unlicensed version of Workbench be used to upgrade a project or does the lack of a license limit that functionality?
    Tue May 03 19:27:54 GMT 2016 Answer Like 0 Follow 0
  • In iFix5.8 if we make systemmenu to False from property window, left side logo also going off.(on title bar iFix logo)
    But in iFix 5.5,if we make systemmenu to False only 3 buttons are going off,the logo remains on title bar.
    Is there any way to remove/disable that logo in a aprticular window?
    Tue May 03 16:00:17 GMT 2016 Answer Like 0 Follow 0
  • Cimplicity Version 9.0 SIM 13
    With this new version, when I restart the project on the server, every workstation pops up a message with the above warning.
    Each workstation has to manually clear the message.This didn't happen previously.
    Is there any way to prevent the dialog message from appearing?

    Thanks!
     
    Tue May 03 12:29:55 GMT 2016 Answer Like 0 Follow 0
  • I want to be able to see the implicity references inside of a SHIFTR_WORD in PME 7.0 logic developer I have tried using datawatch but when I enter the reference address that are not defined (starting address for the register) I only get ??? in the data watch value column.  Does anyone know how to actively monitor the values?
    Mon May 02 22:48:15 GMT 2016 Like 0 Follow 0
    Best Answer chosen by bill2bhappy
    Assign the variable associated with the starting address a dimension equal to the length of the SHIFTR_WORD instruction instead of the default dimension of 1. Then all elements of the array will show up in the data watch window.
    Or, you can create a custom reference view table to show all the addresses you need.
    Tue May 03 01:19:21 GMT 2016 1 0
    Show 2 Answers
  • I have a GE Fanuc 90-30 series PLC in a Spectra Panelboard.
    Our panelboard was instaled on 1998; the PLC batery and UPS backup fail at same time and we loss the program. Now the emergency generator didn´t work in automatic function.

    How can I do to recover the PLC program to reinstal it?
    Mon May 02 20:09:03 GMT 2016 Like 0 Follow 0
    Show 3 Answers

Browse by Product


Software

Hardware