• AOliv1457018013

    Exception in thread

    posted in Real Time Information Portal
    When trying to login into the RTIP I get this exception, on the Java console:

    Exception in thread "AWT-EventQueue-2" java.lang.NullPointerException
        at com.gefanuc.proficyrtip.apps.startup.StartupLoginManager.loginNewUser(Unknown Source)
        at com.gefanuc.proficyrtip.apps.startup.StartupLoginManager.processLogin(Unknown Source)
        at com.gefanuc.proficyrtip.client.dialogs.login.LoginDialog.sendEvent(Unknown Source)
        at com.gefanuc.proficyrtip.client.dialogs.login.LoginDialog.actionPerformed(Unknown Source)

    And the connection does not perform.
    How do I solve?
    Thu May 05 19:39:02 GMT 2016 Answer Like 0 Follow 0
  • Hello,
    I am trying to configure a Quickpanel to display information from an EATON C441CB with C441T Ethernet Module. The problem is, the Ethernet I/O driver in ME doesn't seem to have support for this type of ethernet IP communication. With AB RXLogix, communication setup with this device using Quick Connect required only the information found on the product manual page: class, configuration, assembly instance, etc.

    Does anyone know a method to communicate to the C441T?

    The product manual can be found at: http://www.eaton.com/ecm/idcplg?IdcService=GET_FILE&allowInterrupt=1&RevisionSelectionMethod=LatestReleased&noSaveAs=0&Rendition=Primary&dDocName=MN04200002E

    Wed May 04 16:21:53 GMT 2016 Like 0 Follow 0
    Best Answer chosen by van1.4621880455506274E12
    It appears you're trying to set up the system for the QP+ to be the control engine. Your initial post suggests you really only need it to be an HMI, since you said you want to display data from the Eaton device. If that is the case, just add the HMI component to the QP+ target and select the Modbus TCP/IP ethernet communications driver from the list of "View OPC drivers" under the "PLC Access drivers" in the navigator window. There is also a "Native" Modbus TCP driver but I've found the OPC driver to be significantly more flexible in allowing you to adapt to the way the remote device has implemented Modbus.
    Thu May 05 15:36:07 GMT 2016 0 0
    Show 8 Answers
  • I use 90-30 series PLC's in my designs I have a customer requirement to supply a 3d model to include the control cabinet wiring. Everything is done but the PLC model. None of the 13 part numbers I searched on this site shows up in either 3D or 2D. Does anyone know where I can find what I am looking for?
    IC695PSA040, IC693PWR330, IC695CPU315, IC695ACC302, IC695ETM001, IC693MDL645, IC693ALG221, IC693MDL930, IC695CHS012, IC695LRE001, IC694CHS392, IC693CBL300,  IC693ACC307.

    Thank you
    Wed May 04 15:35:33 GMT 2016 Like 0 Follow 0
    Show 1 Answer
  • Cimplicity 8.2 SIM39
    Trying to debug a script in Program Editor using the Watch window.  Point values come up as hex numbers (e.g. &H01EE7D58).  How can I covert these values to make any sense out of them?  I tried converting using several online converters but none equal the value shown in the Point Control Panel.
    Wed May 04 14:49:52 GMT 2016 Answer Like 0 Follow 0
  • WDean1460738982

    upgrade project

    posted in CIMPLICITY
    Can an unlicensed version of Workbench be used to upgrade a project or does the lack of a license limit that functionality?
    Tue May 03 19:27:54 GMT 2016 Answer Like 0 Follow 0
  • In iFix5.8 if we make systemmenu to False from property window, left side logo also going off.(on title bar iFix logo)
    But in iFix 5.5,if we make systemmenu to False only 3 buttons are going off,the logo remains on title bar.
    Is there any way to remove/disable that logo in a aprticular window?
    Tue May 03 16:00:17 GMT 2016 Answer Like 0 Follow 0
  • Cimplicity Version 9.0 SIM 13
    With this new version, when I restart the project on the server, every workstation pops up a message with the above warning.
    Each workstation has to manually clear the message.This didn't happen previously.
    Is there any way to prevent the dialog message from appearing?

    Tue May 03 12:29:55 GMT 2016 Answer Like 0 Follow 0

Browse by Product